BFC8117-200W Explosion-proof Emergency Light for Fermentation Distilleries

                          BFC8117-200W Explosion-Proof Emergency Light for Fermentation Distilleries - Hubei Beili Lighting

Product Description:

Used in hazardous environments such as petroleum extraction, oil refining, chemical industries, as well as offshore oil platforms and oil tankers for general and operational lighting;

Suitable for lighting energy-saving renovation projects and locations where maintenance and replacement are difficult;

Applicable to Zone 1 and Zone 2 of explosive gas atmospheres;

Suitable for explosive gas environments of Class IIA, IIB, and IIC;

Applicable to combustible dust environments in Zone 21 and Zone 22;

The FCT93 modular explosion-proof street light is suitable for locations with high protection requirements and humid conditions;

The FCT93 modular explosion-proof street light is suitable for low-temperature environments above -40°C.

2. Technical Parameters

Compliance Standards: GB3836.1, GB3836.2, GB3836.3, GB3836.9, GB12476.1

Explosion-Proof Marking: Ex d e mb IIC T6 Gb/Ex tD A21 IP66 T80℃

Input Voltage: AC220V (Range: AC90～305V)

Input Frequency: 50/60Hz (Range: 47～63Hz)

Light Source Type: LED

Light Source Power: 100W, 200W, 300W, 400W, 500W, 600W

Insulation Class: I

Power Factor: >0.95

Protection Rating: IP66

Corrosion Resistance Rating: WF2

Inlet Specification: G3/4 (Flange type, Guardrail type) M20 (Bracket type)

Applicable Cable Specification: Φ6mm～Φ10mm

3. Product Features

The housing is made of high-strength aluminum alloy through die-casting, with high-voltage electrostatic spraying on the surface, providing waterproof and dustproof properties.

Professionally designed secondary light distribution system using optical software, ensuring reasonable beam distribution, uniform illumination, and high light efficiency.

The transparent cover is made of PC material, offering high light transmittance and strong impact resistance.

Available in street light and bracket styles to meet the requirements of various working environments.

All exposed fasteners are made of stainless steel, ensuring safety and reliability.

II. Product Characteristics

1. Explosion-Proof LED Light | FCT93-120BF features a high-quality aluminum alloy housing, manufactured using advanced "high-pressure die-casting" technology. All exposed fasteners are made of stainless steel screws, providing strong impact and corrosion resistance;

2. The product surface undergoes a series of treatments including acid washing, phosphating, and high-speed shot blasting, followed by high-voltage electrostatic spraying. The coating is uniform and highly adhesive, offering excellent corrosion resistance, oxidation resistance, and lighting performance;

3. Modular combination design, with a maximum power of up to 500W; the lens is designed for secondary light distribution, making it suitable for use as both a street light and a ceiling light;

4. The joint surface is sealed with high-temperature resistant silicone rubber, achieving a protection rating of IP66, suitable for both indoor and outdoor use;

5. The transparent component is made of imported engineering resin, with UV resistance and anti-glare treatment, providing soft light, uniform illumination, and no glare, effectively preventing discomfort and fatigue for workers caused by lighting;

6. Explosion-Proof LED Light | FCT93-120BF utilizes a new generation of LED light source, with a luminous efficiency exceeding 100, a color rendering index greater than 80, and a luminous flux maintenance rate of over 95% at 2000 hours. The lifespan is up to 70,000 hours, enabling area maintenance;

7. The light is equipped with the company's specially designed intelligent constant current power supply, supporting a wide input voltage range of AC165V～AC265V.

                           BFC8117-200W Explosion-Proof Emergency Light for Fermentation Distilleries - Hubei Beili Lighting